Not compatible

Victron Energy MultiPlus-II 48/5000/70-95 120V + Rich Solar RS-B241S

Checked automatically against spec sheets. Not yet confirmed in a real install. Last checked 2026-10-28. We don't track firmware versions.

What you'll set up yourself

  1. Closed-loop communication needs an extra part: Victron GX device (e.g. Cerbo GX) for BMS-Can or a Lynx Smart BMS.

Published limits, side by side

Spec Victron Energy MultiPlus-II 48/5000/70-95 120V Rich Solar RS-B241S
Voltage 48 V accepts 38–66 V 25.6 V
Current Max battery current Not published Max charge 100 A Max output 100 A
Communication Victron BMS-CanVictron VE.Bus BMSVictron Lynx Smart BMS None listed
Cable connection Stud size M8 Terminal M8

Values come from each maker's documents. "Not published" means the maker doesn't state it.

Confirm with the makers before you buy

This result checks two things: the battery's voltage suits the inverter, and the inverter maker lists this battery for closed-loop communication (the battery tells the inverter how to charge it). It doesn't check current limits, charge settings, firmware, cable sizes, or safe installation. Confirm those with both makers before you buy.

Sources

This result comes from the documents below. We haven't yet found an outside source that confirms it, such as a forum report or a video of a real install.

Where to buy

Victron Energy MultiPlus-II 48/5000/70-95 120V

  • No store links yet. The maker's site is below.
  • Victron Energy (maker)

Rich Solar RS-B241S

Spot a mistake? Email errata@offgridstacks.com with this page's link.