Needs manual setup
Growatt SPF 6000T DVM-MPV + SimpliPhi Power AmpliPHI 3.8
- Voltage matches: the 51.2 V battery suits this 48 V inverter.
- The inverter maker doesn't list this battery for closed-loop communication. The battery maker doesn't say it can run without communication. Ask them before you set it up by hand.
Checked automatically against spec sheets. Not yet confirmed in a real install. Last checked 2026-10-12. We don't track firmware versions.
Size the battery cable and fuse for this pair in the build tool, from your run length.
What you'll set up yourself
- Ask SimpliPhi Power whether this battery can run without communication. Their documents don't say.
-
Enter the battery's charge settings on the inverter by hand, in the battery
settings described in the inverter's manual.
- Max charge current: no more than 37.5 A per battery, from the battery's spec sheet.
- Charge voltage, float voltage, and low-voltage cutoff: from the SimpliPhi Power AmpliPHI 3.8 manual.
Published limits, side by side
| Spec | Growatt SPF 6000T DVM-MPV | SimpliPhi Power AmpliPHI 3.8 |
|---|---|---|
| Voltage | 48 V | 51.2 V |
| Current | Max battery current Not published | Max charge 37.5 A Max output 37.5 A Peak output 100 A |
| Communication | Growatt SPF/SPE closed loop | Sol-Ark closed loop |
| Cable connection | Stud size Not published | Terminal 3/8'' (10 mm) threaded stud |
Values come from each maker's documents. "Not published" means the maker doesn't state it.
Confirm with the makers before you buy
- Each product's current limits. One or both aren't published, so ask both makers.
- Which firmware versions support this pairing. We don't track firmware.
- That your cable lugs fit the inverter's battery studs (Not published) and the battery's terminals (3/8'' (10 mm) threaded stud).
- How to install both safely, from each maker's manual and your local code.
This result checks two things: the battery's voltage suits the inverter, and the inverter maker lists this battery for closed-loop communication (the battery tells the inverter how to charge it). It doesn't check current limits, charge settings, firmware, cable sizes, or safe installation. Confirm those with both makers before you buy.
Sources
This result comes from the documents below. We haven't yet found an outside source that confirms it, such as a forum report or a video of a real install.
Where to buy
Growatt SPF 6000T DVM-MPV
- No store links yet. The maker's site is below.
- Growatt (maker)
SimpliPhi Power AmpliPHI 3.8
- No store links yet. The maker's site is below.
- SimpliPhi Power (maker)
Spot a mistake? Email errata@offgridstacks.com with this page's link.