Needs manual setup

OutBack Power FXR3048A + Discover Energy Systems HELIOS ESS 52-48-16000

Checked automatically against spec sheets. Not yet confirmed in a real install. Last checked 2026-10-12. We don't track firmware versions.

What you'll set up yourself

  1. Enter the battery's charge settings on the inverter by hand, in the battery settings described in the inverter's manual.

Published limits, side by side

Spec OutBack Power FXR3048A Discover Energy Systems HELIOS ESS 52-48-16000
Voltage 48 V accepts 42–68 V 51.2 V
Current Max battery current 90 A Max charge 200 A Max output 200 A Peak output 300 A
Communication Open loop (no comms) Sol-Ark closed loopVictron BMS-CanGrowatt SPF/SPE closed loopOpen loop (no comms)
Cable connection Stud size M8 × 1.25 Terminal Quick Connect Plug and Pull Terminal

Values come from each maker's documents. "Not published" means the maker doesn't state it.

Confirm with the makers before you buy

This result checks two things: the battery's voltage suits the inverter, and the inverter maker lists this battery for closed-loop communication (the battery tells the inverter how to charge it). It doesn't check current limits, charge settings, firmware, cable sizes, or safe installation. Confirm those with both makers before you buy.

Sources

This result comes from the documents below. We haven't yet found an outside source that confirms it, such as a forum report or a video of a real install.

Where to buy

OutBack Power FXR3048A

  • No store links yet. The maker's site is below.
  • OutBack Power (maker)

Discover Energy Systems HELIOS ESS 52-48-16000

Spot a mistake? Email errata@offgridstacks.com with this page's link.