Needs manual setup
SOL-ARK 18K-2P-LV + EG4 WallMount Indoor 280Ah
- Voltage matches: the 51.2 V battery suits this 48 V inverter.
- The battery maker says it works with this inverter's link (Sol-Ark closed loop), but the inverter maker doesn't list this battery. The battery maker doesn't say it can run without communication. Ask them before you set it up by hand.
Checked automatically against spec sheets. Not yet confirmed in a real install. Last checked 2026-10-12. We don't track firmware versions.
Size the battery cable and fuse for this pair in the build tool, from your run length.
What you'll set up yourself
- Ask EG4 whether this battery can run without communication. Their documents don't say.
-
Enter the battery's charge settings on the inverter by hand, in the battery
settings described in the inverter's manual.
- Max charge current: no more than 140 A per battery, from the battery's spec sheet.
- Charge voltage, float voltage, and low-voltage cutoff: from the EG4 WallMount Indoor 280Ah manual.
Published limits, side by side
| Spec | SOL-ARK 18K-2P-LV | EG4 WallMount Indoor 280Ah |
|---|---|---|
| Voltage | 48 V accepts 43–59 V | 51.2 V |
| Current | Max battery current 350 A | Max charge 140 A Max output 140 A Peak output 200 A |
| Communication | Sol-Ark closed loop | EG4 hybrid closed loopEG4 EHV closed loopGrowatt SPF/SPE closed loop |
| Cable connection | Stud size Not published | Terminal Not published |
Values come from each maker's documents. "Not published" means the maker doesn't state it.
Confirm with the makers before you buy
- Whether one battery can take the inverter's full current. The inverter's max battery current is 350 A. This battery is rated for 140 A charging and 140 A output. Ask how many batteries to run in parallel.
- Which firmware versions support this pairing. We don't track firmware.
- That your cable lugs fit the inverter's battery studs (Not published) and the battery's terminals (Not published).
- How to install both safely, from each maker's manual and your local code.
This result checks two things: the battery's voltage suits the inverter, and the inverter maker lists this battery for closed-loop communication (the battery tells the inverter how to charge it). It doesn't check current limits, charge settings, firmware, cable sizes, or safe installation. Confirm those with both makers before you buy.
Sources
This result comes from the documents below. We haven't yet found an outside source that confirms it, such as a forum report or a video of a real install.
Where to buy
SOL-ARK 18K-2P-LV
- Current Connected
- SOL-ARK (maker)
EG4 WallMount Indoor 280Ah
- Current Connected
- Signature Solar
- EG4 (maker)
Spot a mistake? Email errata@offgridstacks.com with this page's link.